A non-toxic, water-based waterproofing solution that’s safe to use and effective for keeping surfaces dry.
Product Details
Why
End the frustration of water seeping through planter boxes, bathrooms or kitchen floors with this fast-setting, breathable membrane. It bonds strongly to damp surfaces and replaces traditional, messy screeds to give you a waterproof finish that lasts.
Prep the Surface: Scrub the area clean of dirt and grease. Patch any cracks/holes and create a small cement "slope" (fillet) along the corners where walls meet the floor.
Wet the Area: Lightly dampen the surface with water. It should be moist but have no standing puddles.
Mix: Slowly add the Powder (Part B) to the Liquid (Part A). Stir for 3 minutes until smooth. Use the mix within 30 minutes.
First Coat: Use a stiff brush or roller to apply an even layer, ensuring you fill all tiny holes and gaps.
Second Coat: Wait 4–8 hours for the first coat to dry. Apply the second coat cross-wise (at a 90-degree angle to the first) to ensure total coverage. Note: Use 2 coats for bathrooms/balconies; 3 coats for water tanks.
Dry & Test: Let it cure for 24 hours. Before tiling, perform a "flood test" by filling the area with water for a day to confirm it is leak-free.
Clean Up: Wash your tools with water immediately after use. Once the product sets, it can only be removed by scraping.
💡 Quick Tips: Do not apply to surfaces with active, running leaks. Fix the leak and dry the area before starting.
Coverage
Minimum 2 coats at approximately 1.0 kg/m2 per coat
